Skip to page content

Shop

SENNHEISER EVO D1 PRESENTATION SET LAPEL LAVALIER DIGITAL WIRELESS MICROPHONE SYSTEM ME2 LAPEL OMNI MIC

Stock code: SENEWD1ME2NHNT

Stock Availability

Auckland North Island South Island Warehouse

  • SENNHEISER

Description

OVERVIEW
evolution wireless D1 Lavalier-Set with ME 2 lavalier microphone for live stage use.

evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. ew D1 is the number one for every gig and live event when you need to simply rely on pure brilliance. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.

FEATURES
- Unobtrusive professional clip-on microphone
- Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
- Automatic frequency management
- Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth
- Audio effects: equalizer, de-esser, automatic gain control
- iOS app for remote control and monitoring of the system
- Sturdy metal housing

WHAT'S IN THE BOX?
- EM-D1 rackmount receiver
- SK-D1 bodypack transmitter
- ME 2 clip-on microphone
- NT-12 power supply
- Transport Case
- User Manual

TECHNICAL DATA

SK D1
Microphone: 50 to 20,000 Hz
2.2 V RMS
Weight: approx. 85 g
RF output power: adaptive, up to 100 mW (country-specific)
Battery Specification: 2 x AA size battery (1,5V)
Input impedance: 1 MΩ
Connection: 3.5 mm jack socket, lockable
Line: 20 to 20,000 Hz
3.3 V RMS
Input sensitivity: automatic sensitivity adjustment
Accupack: BA 30 (Li-Ion, 3.7V)

ME 2
Microphone: pre-polarized condenser
Max. sound pressure level: 130 dB SPL
Pick-up pattern: omni-directional
Sensitivity: 20 mV/Pa

System
THD, total harmonic distortion: typ. < 0,1 %
Storage temperature: – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics)
Operating temperature: – 10 °C to +55 °C
Signal-to-noise ratio: ≥ 105 dB (A)
RF frequency range: 2,400 to 2,483.5 MHz
Modulation: GFSK with back channel
Dynamic range: > 135 dB (A)
Audio sampling: 24 bit/48 kHz
Transmission method: TDMA, time diversity, frequency diversity, fast switching antenna diversity
Latency: 3.9 ms
Audio codec: APT-X Live
AF frequency response: 20 to 20.000 Hz

EM D1
Weight: approx. 824 g
Audio output: Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu
RF output: power back channel 10 mW/100 mW (country-specific)
Power supply: 12 V DC hollow jack
Antenna connector: 2 x Rev-SMA
Current consumption: 350 mA
Low-cut filter: –3 dB at 120 Hz
RF sensitivity: <-90 dBm
Connection: XLR/¼" (6.3 mm) jack
Equalizer: 7-band graphic equalizer
Automatic gain control (AGC): compression/expansion with automatic make-up gain function
Display: OLED
Network socket: RJ45
Network protocol: Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6