ROLAND AIRA SCOOPER PROGRAMMABLE SCATTER EFFECT WITH CV/GATE AND EURORACK COMPATIBILITY LTO
Stock code: ROLAIRASCOOPER
Auckland North Island South Island Warehouse
Apply for Finance Now on $379.00
Quick weekly payments on $379.00
Found a Cheaper Price? Put us to the test!
-Single-pass looper with dramatic Scatter effects
-CV/Gate parameter control including Scatter depth/type, pitch, and filter
-Tabletop unit or 21 HP Eurorack module using AC adaptor or Eurorack power
-24-bit knobs with over 16 million steps of resolution
-Re-programmable via Mac, PC, iOS, Android application
-15 patchable submodules, expandable with free updates
-2 inputs and 2 outputs with dual-mono or stereo capability
-AIRA Link compatible
-24bit/96kHz audio interface
-Carefully crafted in Japan
Single-pass looper with dramatic Scatter effects
SCOOPER is an ultra-modern effect that can sample, mangle, degrade and glitch captured loops of incoming audio. After capturing an audio loop, you can use SCOOPER to djust the loop’s pitch as well as process it through a filter section and various Scatter types that slice and warp individual steps. Using the large comfortable controls or standard 1/8" patch cables, you can independently control the Scatter type and depth, pitch, filter, sync trigger and Scatter on/off toggle. Both the Scatter Depth and Scatter Type parameters have input level controls for adjusting the modulation range when controlled from an external source. Two inputs and two outputs make SCOOPER a stereo-capable, 24bit/96kHz audio interface for Eurorack systems, and AIRA Link USB compatibility gives it single-cable, plug and play connectivity with the MX-1 Mix Performer.
Re-programmable via Mac, PC, iOS, Android application
While it sounds great out of the box, you can fully customize SCOOPER’s internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution “GRF” knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users. While it sounds great out of the box, you can fully customize SCOOPER’s internal signal path by re-patching its array of virtual sub-modules via a custom application that works on Mac and PC as well as iOS and Android devices. Submodules are re-patched through a simple and intuitive drag and drop interface that even lets you choose which parameters are assigned to the high-resolution “GRF” knobs. You can reprogram SCOOPER in realtime via USB connection or save and recall patches with a simple audio signal. You can even share patches with other SCOOPER users.
SCOOPER includes 15 virtual sub-modules with more available through future expansion:
LFO, ADSR, NOISE, SAMPLE & HOLD, RING MOD, FILTER 6dB, FILTER 12dB, TONE, AMP, MIXER, STEREO MIXER, CURVE CONV, GATE DIVIDER, TRIG TO CV DELAY TIME, MIDI CLOCK TO GATE
CV Input Level:-10 – +10 VGATE Input Level:+3 VMaximum Recording Time:10 SecControls:REC/PLAY button
GRF 1 knob (SCATTER DEPTH)
GRF 2 knob (SCATTER TYPE)
GRF 3 knob (PITCH)
GRF 4 knob (FILTER)
GRF 5 button (SYNC TRIG)
GRF 6 button (SCATTER)VOLUME knob
Connectors:INPUT 1, 2 jacks: Miniature phone type
REMOTE IN jack: Miniature phone type
OUTPUT 1, 2 jacks: Miniature phone type
GFR 1–6 jacks: Miniature phone type
USB port: MicroB type (Audio/MIDI)
DC IN jack
Power Supply:AC adaptor or Eurorack powerCurrent draw:950 mA (AC adaptor),450 mA (Eurorack power)Accessories:AC adaptor
Leaflet "USING THE UNIT SAFELY"
Eurorack installation screws
Eurorack power cable
SIZE AND WEIGHTWidth:106.6 mm, 4-1/4 inchesDepth:128.4 mm,5-1/16 inchesHeight:58.3 mm,2-5/16 inchesWeight:320 g,12 oz
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.