Skip to page content

Shop

RELOOP RP7000S MK2 - SILVER - PROFESSIONAL HIGH-TORQUE DIRECT DRIVE TURNTABLE WITH PHONO & LINE OUTPUTS EX CART LID LTO

Stock code: REL238928

Our Price
$799.00$699.00
$69.90
For only $69.90, include the
Rocksure Performance Warranty
More information

Stock Availability

Auckland North Island South Island Warehouse

Include Rocksure Performance Warranty

$69.90
For only $69.90, include the
Rocksure Performance Warranty
More information

Apply for Finance Now on $699.00

Quick weekly payments on $699.00

12 mths $16.49
24 mths $9.19
36 mths $6.78
 
Interest Rate: 19.95%
Establishment Fee: $59.00
Monthly Service Fee: $1.80
Please read:
  • You must be a NZ Citizen / Permanent Resident and currently living in New Zealand.
  • You must be older than 18 years of age.
  • You must provide proof of identity by means of a NZ drivers licence or New Zealand Passport.
  • Finance Now's normal lending criteria applies to your loan application.
  • Click here to view a copy of our standard terms and conditions, a complete list of Finance Now's standard fees and/or our QFE Disclosure Statement, or visit www.financenow.co.nz for more information.
  • Full disclosure of all of the terms of your loan (including the total amount payable over the term of the loan) will be provided to you prior to completion of your loan.
  • Delivery: The delivery address must be the residential address of the applicant. You cannot change your delivery address once your finance application has been submitted. Please ensure the delivery address entered is correct.
  • Pickup: The primary applicant must provide valid Photo ID when collecting from chosen RockShop Store.

Found a Cheaper Price? Put us to the test!

Challenge us

Product video

Save $100
  • RELOOP

Description

NOTE: DOES NOT INCLUDE CARTRIDGE AS PICTURED.

DESCRIPTION

PROFESSIONAL UPPER TORQUE TURNTABLE SYSTEM
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.

FEATURES

STURDY CASING CONSTRUCTION
By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.

BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASE
The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).

DUAL START/STOP BUTTONS, PRECISE MOTOR CONTROL AND REVERSE FUNCTION
As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.

HIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADER
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).

HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMP
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.

POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.

SPECIFICATIONS

Turntable:
Type: Direct-drive turntable
Drive: Quartz driven upper-torque direct drive
Motor: 16-pole, 3-phase, brushless motor
Turntable speeds: 3 speeds, manual (33 1/3, 45, 78 RPM)
Starting torque: 2.8 – 4.5 kg/cm (adjustable)
Adjustable stop time (0.2 - 6 sec.)
Start-up time / change to RPM: <0.2 sec
Wow and flutter: 0.01% WRMS*
S/N ratio: > 55dB (DIN-B)
Brake system: Electronic brake

Platter:
Material: Die cast aluminium
Diameter: 332 mm
Weight: Approx. 1.5 kg

Tone arm:
Type: Universal, static balanced, S-shaped
Effective length: 230 mm
Overhang: 15 mm
Tracking error range: < 3°
VTA setting range: 0-6 mm
Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
Anti-skating range: 0 – 3 g
Effective tone arm mass: 30 g
Connections: 1x PHONO/LINE Out (gold-plated), 1x GND earth connection

General:
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 13 W
Dimensions: 458 x 354 x 144,6 mm
Weight: approx. 11.7 kg