Skip to page content

Shop

RELOOP HIFI TURN5 DIREC DRIVE CURVE S ARM HIFI TURNTABLE W ORTOFON 2M RED CART, LID

Stock code: REL238666

Stock Availability

Auckland North Island South Island Warehouse

  • RELOOP

Description

DESCRIPTION

DIRECT DRIVE HIFI TURNTABLE SYSTEM
With TURN5 Reloop HiFi is launching a quartz-controlled, direct-drive turntable that meets the highest sound requirements. Using our expertise we have developed a new HiFi turntable, which with its technical sophistication is the best in its class.

FEATURES

POWERFUL DC MOTOR & LOW-RESONANCE DIE-CAST PLATTER
The brushless, direct-drive DC motor ensures a powerful drive at a very consistent rotation and the TURN5 has been produced using die-cast precision manufacturing techniques. A dampening rubber base on the turntable system eliminates any unwanted resonance and the accompanying 5 mm rubber coating also protects against vibrations so that nothing stands in the way of the exceptional sound reproduction.

HIGH-QUALITY CONTROL ELEMENTS & CONNECTIONS
The three motor speeds can be selected with convenient controls on the top to 33 1/3, 45 or 78 rpm. This means the TURN5 can also play back old shellac records with a corresponding mono-system (not included). Next to this is the large start/stop knob. The universal locking mechanism (SME) on the tonearm allows for a quick and easy headshell exchange. Also, with the supplied counterweight a whole range of cartridges can be used as this also supports heavier pick-ups. On the rear panel of the TURN5 is a gold-plated phono output pair (RCA) with a separate earth connection to prevent any potential interference. The terminal for all cable connections has been recessed to protect them as much as possible. For a simple exchange, the power cable and the RCA cable can be removed.

STATIC BALANCED S-TONE ARM & HI-TECH ORTOFON CARTRIDGE SYSTEM
The TURN5 uses a statically balanced S-shape tone arm. This is supplied, along with the hydraulic lift and an anti-skating setting, with a convenient tone arm height adjustment with locking VTA. This guarantees optimum performance of the cartridge and an accurate reproduction of the recording medium. The supplied Ortofon 2M Red cartridge is already pre-mounted on a headshell and stands out thanks to its elliptical cut with phenomenal sound quality.

SPECIFICATIONS

Turntable Section
Type: Direct Drive Manual Turntable System
Drive: Quartz driven upper-torque direct drive
Motor: 16pole, 3phase, brushless DC motor
Turntable Speeds: 3 speeds, fully manual (33 1/3, 45, 78 rpm)
Starting Torque: 4500 g/cm
Start-up time / rpm change: Less than 0.2 sec.
Wow and flutter: 0.01% WRMS
S/N Ratio: More than 55dB (DIN-B)
Brake system: Electronic brake

Tonearm Section
Type: Universal Static Balanced S-Shaped
Effective Length: 230mm
Overhang: 15mm
Tracking Error Angle: Less than 3 degree
Adjustable Tonearm Base (VTA): 0-6 mm
Applicable Cartridge Weight: 3.5~8.5g (including headshell is 13~18g)
Anti-Skating Range: 0 – 3g
Effective tonearm Nass: 30g

Turntable Platter:
Material: Aluminium die-cast
Diameter: 332mm
Weight: About 1.8kg (including rubber mat)

General:
Power Supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power Consumption: 9W
Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
Weight: Approx. 12.8kg

Terminals:
1x PHONO Out (gold-plated)
1x GND Earth Terminal