Skip to page content



Stock code: PRIZ900012000

Stock Availability

Auckland North Island South Island Warehouse

Product video



Primacoustic room kits have been carefully designed to address primary acoustical concerns that are common to all rooms by combining various components such as wall panels, bass traps, diffusion and hardware into an easy to use format.

The London 12 is the flagship. It features fabric covered high-density glass wool panels for even absorption throughout the audio range. This makes the London 12 the ideal choice for more demanding studios, broadcasters and post production facilities while the innovative design can easily be adapted for home theater or high fidelity listening rooms. For those that need a budget solution, we also offer the home studio enthusiast with foam based products that can tame room chatter echo and primary reflections.

London 12™ Room Kit

- Complete recording studio in a box
- Live-end, dead-end (LEDE) room design
- High performance fabric covered acoustic panels
- Includes easy-mount hardware and screws

The Broadway London 12 room kit is designed for rooms up to 150 sq ft (13.9 sq m), or can be combined with other products to treat larger spaces. Ideally suited for studio control rooms and home theaters, these easy to use kits can be a single box acoustic treatment solution.

The London 12 contains Broadway panels that tackle problems affecting any room, such as primary reflections, flutter echo, standing waves and excessive bass. In addition to acoustic panels, each London 12 room kit includes the corresponding mounting hardware and instructions for easy installation.

Broadway panels are made from high-density 6lb per cubic foot fiberglass, offering nearly five times greater absorption than typical low cost foam alternatives. This means that you get more absorption with less panels, while assuring an even absorption curve throughout the frequency range. The London 12 room kit is available in three fabric colors. 22 panels included.

Broadband Panel - Square Edge
24" x 48" x 2" (60x120x5cm)* Control Columns - Beveled Edge
12" x 48" x 2" (30x120x5cm)* Scatter Blocks - Square Edge
12" x 12" x 1" (30x30x2.5cm)* Surface Impalers - Used to hang the Control Columns and Scatter Blocks. Corner Impalers - Used to hang the Broadband corner bass traps. Anchors, Screws and 1/4" Drill Bit to mount impalers.

* Approximate sizes. Not all kits contain all panel sizes. London 12 parts shown.