ORTOFON CONCORDE DJ S BLUE TURNTABLE PHONO CARTRIDGE - SINGLE - EACH
Stock code: ORTOOC102
CONCORDE DJ S
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
DJ S is a solid-built cartridge in a new blue nylon material. It has a fine spherical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction.
Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
The DJ series of cartridges are great for any style of music, and has been a favored choice of DJs around the world
Output voltage at 1000Hz, 5cm/sec: 6 mV
Channel balance at 1kHz: 2 dB
Channel separation at 1kHz: 23 dB
Channel separation at 15 kHz: 15 dB
Frequency range at -3dB: 20-20.000 Hz
Frequency response: 20-18.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmende tracking force: 80 μm
Compliance, dynamic lateral: 9 μm/m N
Stylus type: Spherical
Stylus tip radius: R 18 μm
Tracking force range: 2,0-4,0 g (20-40 mN)
Tracking force recommended: 3,0 g (30 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 750 Ohm
Internal inductance: 450 mH
Recommended load resistance: 47 kOhm
Recommended load capacitance: 200-600 pF
Cartridge weight: 18,5 g
Replacement stylus unit: DJ S / DJ E
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock item as it may:
> Be end of line / a deleted model;
> Have minor cosmetic damage or marking that does not affect the usability of the item;
> Be second Hand or Ex-Demo product;
> Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
Condition – While we attempt to identify any issue on the website listing, this is not always possible. If you have any questions regarding the condition of an item, please contact us for additional information prior to ordering. All goods will be tested and sent in working condition.
Stock Availability – Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available. We will advise you before processing your order.
Discount – Not all of the Clearance items have been discounted. They may be listed as Clearance items as they are end of line models that will not be ordered in again.
Warranty – Some of the Clearance items are sold without an express manufacturers’ warranty. You agree to this as a condition of purchase. The warranty status will be noted on your invoice. This does not limit your rights under the Consumer Guarantees Act 1993.