Skip to page content



Stock code: NEUKH120AG

For only $0.00, include the
Rocksure Performance Warranty
More information

Stock Availability

Auckland North Island South Island Warehouse

Include Rocksure Performance Warranty

For only $0.00, include the
Rocksure Performance Warranty
More information


General DescriptionThe KH 120 A studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 A represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. It has a Mathematically Modelled Dispersion waveguide (MMD (TM), flexible acoustical controls, analog class-AB amplifiers, a large headroom analog input and an extensive mounting hardware range. All of this provides the user with the maximum versatility over a wide variety of acoustic conditions, source equipment, and physical locations.
The KH 120 is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios.


Product Feature | Benefit to the Customer
- Powerful titanium fabric dome
Low-distortion high-frequency reproduction
- Elliptical Mathematically Modelled Dispersion™ (MMD™) waveguide
Smoother off-axis response, more forgiving of diverse acoustical environments
- Composite sandwich cone
Damping of break-up modes
- Long throw bass driver
Low distortions at high sound levels
- Two-colour + dimmable Neumann logo
Displays operation status  and activation of the extensive protection system
- Robust metal grille
Protects against mechanical damage
- Large front panel ports
Reduced bass compression and easier to mount in tight spaces such as OB vans
- Compact aluminium cabinet (magnetically shielded)
Minimises resonances, better heat dissipation, long life
- Wide horizontal dispersion
Freedom of movement across the mixing console
- Narrow vertical dispersion 
Reduces reflections off the mixing console
- One-piece front panel with no discontinuities 
Reduced diffraction and smoother frequency response
- Powerful analog amplifiers with large headroom
Improved transient response
- Production consistency
Any KH 120 is “pair-matched” to any other KH 120
- 4-position bass, low-mid and treble acoustical controls
More control in diverse acoustical environments
- Wide range input gain and output level controls
Easier interfacing with signal sources
- New mounting hardware options
More flexibility in mounting cabinets in more diverse locations
- Display dimmer
For low lighting level conditions or behind the screen applications
- Ground lift
Reduced noise in electrically noisy environments and over-comes ground loops
- Universal switched-mode power supply (100 … 240 V)
One version works in any country and robust to poor quality mains supply
- Separate woofer and tweeter electronic peak limiters and thermal-protection circuitry
High reliability

Technical Data
-3 dB free field frequency response 52 Hz … 21 kHz, ± 3 dB Pass band free field frequency response 54 Hz … 20 kHz, ± 2 dB Self-generated noise
(with input gain set to 100 dB for 0 dBu) <20 dB(A) at 10 cm Sine wave output with a THD < 0.5 % at 1 m 100 Hz @ 95 dB SPL Max. SPL In half space at 3% THD at 1m 111.1 dB SPL
(averaged between 100 Hz and 6 kHz) Max SPL with pink noise in a typical installation 92 dB(C) at 2.3 m, (full range)
94 dB(C) at 2.3 m (with KH 810)
Woofer amplifier, cont.(peak) output power* 50 W (80 W) Tweeter amplifier, cont.(peak) output power* 50 W (80 W) Controller design Analog, active Crossover Frequency 2.0 kHz Crossover Slope (dB/oct.) 24, 4th order Equalization - Bass 0, -2.5, -5, -7.5 dB Equalization - Mid 0, -1.5, -3, -4.5 dB Equalization - High +1, 0, -1, -2 dB Protection circuitry Limiter: low, high Infrasonic filter frequency; slope 30 Hz; 6 dB/oct. Analog Input Impedance, electrically balanced 10k Ohms in position 94/108 dB SPL at 1 m
20k Ohms in position 100/114 dB SPL at 1 m Input gain control (sensitivity) 0 dBu to -15 dBu Output level control 94, 100, 108, 114 dB SPL CMRR >56 dB @ 15 kHz Maximum input level 24 dBu
Displays and Mains Power
Displays and indicators - power on Neumann logo “White” Displays and indicators - limit/clip Neumann logo “Red” Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz Power consumption – Idle 20 W Power consumption – Full output AC 200 W
Cabinet surface finish, color: custom Painted aluminium, Anthracite (RAL 7021) Operating conditions +10° C to +40° C (+50° F to +104° F),
<90% RH, non-condensing Transport/storage conditions −25° C to +70° C (−13° F to 158° F),
<90% RH, non-condensing Drivers Magnetically shielded Woofer 130 mm (5.25”) Tweeter 25 mm (1”) Mounting points 2 x M8 on rear panel Height x width x depth, mm (inches) 277 x 182 x 220 mm (10 7/8” x 7 1/8” x 8 5/8”) Internal net volume / external volume 6.5 liters / 9.7 liters Weight 6.4 kg (14.1 lbs)