Skip to page content

Shop

MESA BOOGIE CLEARLINK BUFFER / BALANCED LINE DRIVER ( SEND )

Stock code: MBACCB

Our Price
$169.00

Stock Availability

Auckland North Island South Island Warehouse

Found a Cheaper Price? Put us to the test!

Challenge us

  • MESA/BOOGIE

Description

The CLEARLINK™ (SEND) LINE DRIVER is designed to compensate for losses in Tone due to increased capacitance in long cable runs.

With a high quality buffer and +12dB of available output gain, it has the ability to drive cable runs of up to 330 Ft./100M before noticeable degradation, when added in-line on the feed from Pedal Board to Amplifier.

When combined with a STOWAWAY™ INPUT BUFFER on the Instrument, the CLEARLINK SEND forms an “Effects Loop” for the Instrument-Pedal Board-Amp signal chain that will reclaim the integrity of your sound through boosted levels and buffering or impedance matching.

Whether used by itself, or with the STOWAWAY as a comprehensive “Front End” solution, it will provide the needed “stable impedance source” to ensure the pieces in your rig “communicate” well. It can be used for balanced signals via two different output jacks; standard 3-pin XLR or ¼” TRS.

It also supports unbalanced signals via the standard ¼” mono jack. If you’re going to send your signal on a marathon, make sure you have a clear link to communicate… because you don’t want your Tone lost in translation.

Made in Petaluma, California with the World’s Finest Materials

High-Speed, Low Noise Op-Amp based Line-Driver Circuit

RFI Filtering minimizes radio-frequency interference and noise

Provides Balanced or Unbalanced Output capable of driving long cable runs and provides amp with a resolute source

Output Level Control - Adjusts the Output Level of the integrated line-driver circuit, from Unity to +12dB.

Balanced XLR Output – Drive cable runs up to 330ft with unsurpassed noise immunity and signal integrity.

Unbalanced ¼” Output - Drive long ¼” cable runs direct to your amp’s input

On/Off Status LED

9VDC External Power Jack Input (power supply not included)

9VDC THRU - Passes the power received at the 9VDC IN jack onto a MESA® Stowaway™ Input Buffer

SPECIFICATIONS

Input Impedance: 1M Ohm

Output Impedance: 150 Ohm Unbalanced / 300 Ohm Balanced

Output Buffer Design: High-Speed, Low Noise Op-Amp

Nominal Operating Voltage: 9VDC

Maximum Operating Voltage: 12VDC

Typical Current Draw: 10mA @ 9VDC

DC Adapter (not included): WARNING!!! To avoid immediate damage and voiding the warranty, the External Power Supply MUST be 9VDC with a NEGATIVE CENTER and a 2.1mm x 5.5mm Barrel Plug

Weight: 0.425 lbs (193 g)

Dimensions (W x D x H): 3.86 x 2.48 x 1.71 inch (98 x 63 x 44 mm)