LINE 6 STAGESOURCE L2T 800-WATT 2-WAY BI-AMPED LOUDSPEAKER W/ INBUILT MIXER
Stock code: LISSL2T
Auckland North Island South Island Warehouse
Apply for Finance Now on $1,299.00
Quick weekly payments on $1,299.00
Found a Cheaper Price? Put us to the test!
Portable, 2-way Powered Smart Loudspeaker with Digital Mixer
Smart Speaker Modes
StageSource™ L2t is designed to be the world’s most versatile loudspeaker system for musicians on the go. Using six powerful DSP-based Smart Speaker modes, you can optimize the speaker’s output for a variety of performance scenarios including front-of-house PA, floor monitor, personal PA, keyboard backline, acoustic guitar backline, or with a multi-effects guitar processor as a high-performance electric guitar speaker system. An onboard accelerometer and pole-mount sensors automatically detect the speaker’s orientation and set the Smart Speaker mode accordingly.
Integrated Multi-channel Mixer with Effects
StageSource L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.
Sweeten any vocal or instrument using the 3-band EQ with sweepable mid, plus Smart Mod and Smart Reverb effects on each input channel. Use Line 6 Acoustic Guitar modeling to add depth and warmth to any acoustic guitar fitted with piezo pickups. Eliminate squeals from your performance with onboard 12-band feedback suppression and an output limiter. The combination of effects, acoustic guitar modeling and feedback suppression make the L2t a powerful live sound solution for acoustic musicians.
StageSource L2t onboard mixer features:
- 2 mic/instrument combi inputs with -20dB pad switches and gain pots
- 1 XLR line aux input
- 1 stereo RCA aux input
- 3-band EQ with sweepable mid
- Acoustic guitar modeling
- 12-band feedback suppression
- Smart Reverb and Smart Mod effects
- XLR outputs
- Master volume
Fast Networking via L6 LINK
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK™ to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
Designed to Be Different
The 800-watt, two-way, bi-amped speaker system and tour-grade plywood enclosure combine to deliver great power and reliability. The innovative multi-function design makes StageSource L2t perfect for a wide variety of applications—stacked on the floor or stage, pole-mounted, positioned horizontally as a floor monitor, used as instrument backline with Virtual Tilt-back, or flown with the integrated M10 suspension points.
The electro-acoustic configuration and powerful DSP implementation of the StageSource L2m loudspeaker make it possible to adapt its output to a variety of applications. When you choose a Smart Speaker mode, the system adjusts crossover points, component levels and dynamic control, ensuring L2m performs optimally in each scenario.
The two-way, bi-amplified design delivers exceptionally balanced, clean and articulate reproduction of live sources and pre-recorded material. A 1” exit high-frequency compression driver is matched to a precision-engineered, 100x50-degree, constant-directivity waveguide, which delivers consistent coverage to ensure everyone in the audience enjoys the same acoustic experience. The 100-degree horizontal dispersion is wide enough for solo use yet controlled enough for arrayed pairs. The 50-degree vertical coverage reduces acoustic smear from reflective sound surfaces, as minimal energy is reflected off of ceilings and floors.
Orientation and Pole-mount Sensors
StageSource L2t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.
For example, when the unit is powered on in a horizontal position, it automatically selects Floor Monitor mode. This mode provides a slight reduction in low-frequency content to counteract coupling when placing the speaker on the floor. If any "backline" mode is chosen (Keyboard, Acoustic Guitar, Electric Guitar), the L2t then checks its orientation (via the accelerometer) and looks to see if it is on a pole (via the pole sensor). If the speaker is vertical and not on a pole, the L2t activates Virtual Tilt-back, which optimizes the speaker tuning to achieve an upward tilt to its main axis. This helps aim the sound upward towards the performer's ears when the speaker is placed on the ground. If the speaker is on a pole, it doesn't activate Virtual Tilt-back because it assumes that the speaker is elevated and aimed in the desired direction.
Integrated Feedback Suppression
Since feedback can ruin a performance, StageSource L2t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.
L2t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L2t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively you want the analyzer to seek out potential feedback frequencies.
Multi-function Design and Scalability
Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you’re using a single L2t as a standalone PA or multiple L2t and L2m speakers as main PA, monitors and backline. Add StageSource L3t/L3m loudspeakers and L3s subwoofers to customize a configuration that meets your live sound or installation needs.
StageSource L2t is ready for whatever the road can throw at it. The robust enclosure is constructed of heavy-duty plywood, and features a tour-grade steel grille with protective screen backing that shields the drivers from impact damage. If you need to fly the speakers, each StageSource L2t features four professional M10 suspension points with a pull-back.
- Multi-channel mixer with 3-band EQ, Smart Effects and acoustic guitar modeling
- Multi-function design for true scalability
- L6 LINK™ digital networking for multi-speaker setups
- 800-watt, 2-way, bi-amped speaker system
- Multi-band feedback suppression
- On-board accelerometer and pole-mount sensors
- Virtual Tilt-back projects speaker’s output upwards in backline mode
- Tour-grade plywood enclosure with M10 suspension points
- Retractable handle for easy portability
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.