Skip to page content



Stock code: JBLJRX215

Stock Availability

Auckland North Island South Island Warehouse

  • JBL


JBL JRX215 Two-Way Sound Reinforcement Loudspeaker System

Greater efficiency and power handling 
JBL 15 in low frequency driver with a 64 mm (2.5 inch) diameter edgewood ribbon voice coil provides more coss sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling. 

Dual-angle pole-mount socket
Allows the speaker to tilt 10° for more uniform audience coverage. 

Durable design
Non-resonant, all-steel handles are used along with an attractive 18-gauge hexagon perforated steel grille to protect components from damage. 

SonicGuardTM protection
SonicGuardTM protects the high frequency driver from excess power without interupting the performance. 

Rugged, acoustically superior enclosure
The rugged, acoustically superior enclosure is constructed from 19mm (.75inch) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. 

Progressive TransitionTM high frequency waveguide
Provides superior coverage control, reduced distortion and smoother frequency response. 

High-voltage capacitors and inductors
High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating. 

Advanced network topology crossover design
Shapes frequency response and delivers "coherent summation" in the crossover region. 

JBL 2414H-C 25mm (1inch) polymer diaphragm compression driver
Improves high frequency performance as well as system reliability. 

Technical Specifications
Power Rating:
250 W / 1000W
Frequency Range (-10 dB): 41 Hz - 18 kHz
Frequency Response (±3 dB): 59 Hz - 13 kHz
Sensitivity (@1m): 99 dB SPL (1w/1m)
Nominal Impedance: 8 ohms
Recommended Amplifier Power: 250 W to 500 W into 8 ohms
Maximum SPL: 129 dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 2.2 kHz
High Frequency Driver: JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition™ Waveguide
Low Frequency Driver: JBL M115-8A
Input Connectors: Neutrik® Speakon® NL-4 (x1); .25in TS phone jack (x1); parallel 

Height: 27.5 in (699 mm)
Width: 18.1 in (460 mm)
Depth: 17 in (432 mm)
Weight: 60.5 lbs (27.4 kg)