HT Club 40 Combo – The ideal gigging valve amp for club sized venues
Equipped with 2 channels and 4 modes the HT Club 40 is the ideal gigging valve amp for club sized venues. The 40W EL34 driven power amplifier has amazing punch and dynamics that will easily cut through in a full band situation. Switching to the amazing ISF equipped overdrive channel accesses a further two modes - 'classic crunch' and 'super saturated lead'.
HT Club 40 Overview:
- Colour: red with wheat grille
- 40 Watt valve combo
- 2xECC83, 2xEL34
- Two footswitchable channels
- 12" Celestion speaker
- Enhanced tone controls
- Patented Infinite Shape Feature (ISF)
- Clean voice switch
- Overdrive voice switch
- Master volume
- Digital reverb with dark/bright switch
- Speaker emulated output
- Effects loop
- 2-way footswitch included
- Cool vintage styling
HT Club 40 Features Overview:
- 40 watt, 2xECC83, 2 x EL34 – Ideal gigging valve amp
The HT Club 40 is a 40 Watt combo that uses 2xECC83 and 2xEL34 valves to create amazing punch and dynamics.
Equipped with 2 channels and 4 modes the HT Club 40 is the ideal gigging valve amp for club sized venues. The 40W EL34 driven power amplifier has amazing punch and dynamics that will easily cut through in a full band situation. Switching to the amazing ISF equipped overdrive channel accesses a further two modes – 'classic crunch' and 'super saturated lead'.
- ISF (Infinite Shape Feature)
Our patented ISF control can take you from the USA to the UK and anywhere between in seconds.
The patented ISF control works with the Bass, Middle and Treble controls to give you access to infinite new sound possibilities from the USA to the UK and everywhere in-between. This fully interactive control allows you to infinitely adjust the response of the tone control network between any of the traditional voicings. In this way you can design your own sound and truly find the sound in your head.
- Two Footswitchable Channels – Clean to overdrive
The HT Club 40 features two footswitchable channels to allow you to switch between the Clean channel and the Overdrive channel.
The HT Club 40 has two channels available for selection, a Clean channel and an Overdrive channel. Using the Gain control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
- Reverb Control – Add in some reverb
The HT Club 40's Reverb control sets the overall level of the reverb effect. Turning the control clockwise will increase the amount of reverb.
The HT Club 40's Reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
- Enhanced Tone Controls – Adjust the balance
Tone Control The Tone control allows adjustment of the balance between treble and bass frequencies within the sound. At low settings (counter clockwise) the sound will be warmer and darker in character. As the Tone control is rotated clockwise the sound will become brighter.
- 12inch Celestion Speaker – Lush valve tones
Speaker The HT Club 40 features a 12inch Celestion speaker that gives the ability to create wonderfully lush valve tones through it.
- Emulated Output – Adjust the balance
The HT Club 40 has a fully specified speaker emulated output which further enhances the studio credentials and allows any guitarist to get amazing valve tone straight to tape or disk.
- Effects Loop – Connect effects pedals
The amp features an effects loop to allow you to connect effects pedals or other professional equipment using the return and send connections. The Effects Loop Level switch sets the effects loop to either +4dBV/-10dBV, which enables you to use it with either professional equipment (+4dBV setting), or with guitar level effects such as effects pedals (-10dBV setting).
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.