…Flat Y-Splitter Cable lets you insert any effects you like and does not take up a lot of space. Open up their possibilities with this simple cable. flat Y-splitter cable with rectangular profile for splitting TRS stereo signals into TS mono signals or as insert cable for TRS effects loops compact…
Stereo Breakout This cable is designed to split a stereo signal. Black- and red-coded mono phone jacks indicate left and right respectively. It may also be used to adapt a stereo cable with mono phone plugs to a mini stereo phone jack. Connectors: 3.5 mm TRS to Dual 1/4 in TSF
This cable is designed to duplicate a stereo signal. It is ideal for use as a headphone adaptor, adapting one headphone jack to two headphones. Connectors: 3.5 mm TRS to Dual 3.5 mm TRSF
Y Cable 3.5 mm TRS to Dual 1/4 in TRSF This cable is designed to duplicate a stereo signal. It is ideal for use as a headphone adaptor, adapting one headphone jack to two headphones. Connectors: 3.5 mm TRS to Dual 1/4 in TRSF
Y Cable 1/4 in TRS to Dual 3.5 mm TRSF This cable is designed to duplicate a stereo signal. It is ideal for use as a headphone adaptor, adapting one headphone jack to two headphones. Connectors: 1/4 in TRS to Dual 3.5 mm TRSF
Y-Cbl–1/4” TRS M to XLR M – 10-Feet / 3-Metres FEATURES: - One 1/4” stereo male to two XLR males.
Y-Cbl–1/4” TRS M to XLR M – 20-Feet / 6-Metres FEATURES: - One 1/4” stereo male to two XLR males.
Y-Cbl–1/4” TRS M to XLR M – 6-Feet / 1.8-Metres FEATURES: - One 1/4” stereo male to two XLR males.
…* No external power required * Connect with a single TRS cable (included) * Control multiple pedals with a simple Y cable* (*not included) * Designed to be aesthetically placed in front of 2 Meris pedals * Includes 1 Flat 11″ TRS cable * PCB socket for mini arduino* DIY midi projects (*not…
…Mic Capsule Extender Cable • XYH-5 X/Y Mic Capsule • XYH-6 X/Y Mic Capsule • MSH-6 Mid-Side Mic Capsule • SGH-6 Shotgun Mic Capsule • SSH-6 Stereo Shotgun Mic Capsule • EXH-6 Dual XLR/TRS Input Capsule • CMF-8 Camera Mounting Bracket • TXF-8 TA3 to XLR Cables
…control of Beat Sync, quantize and trim on the sampler. HIGH-QUALITY SOUND Hear the true quality of your tracks thanks to AC inlets for reduced cable contact resistance and a high-performance 96 KHz/32 bit D/A converter made by Asahi Kasei. Plus a low-jitter clock IC and the 96 kHz/24 bit USB sound…
…aluminium construction - High Pass Filter - 9V or Phantom Power (P48 - via miniXLR) - Level adjustment - High Frequency Boost - Includes SC2 TRS cable, pop shield and wind shield - 10 year extended warranty when you register your microphone The Stereo VideoMic X is the ultimate broadcast-grade…
…or more - Plug-in power: 2.5V supported - Backup recording: -12dB lower than set L/R input gain INPUTS 1/2: - Connectors: XLR / TRS combo jacks (XLR: Pin 2 hot / TRS: Tip hot) - Input gain (PAD OFF): -∞ to 55.0 dB - Input gain (PAD ON): -∞ to 35.0 dB - Input impedance: 1.8 k Ω…
…supported) Connectors TRIGGER IN jack x 6: 1/4-inch TRS phone type PHONES jack: Stereo 1/4-inch phone type MASTER OUT jacks (L, R): 1/4-inch phone type DIRECT OUT jack x 4: 1/4-inch phone type HH CTRL jack: 1/4-inch phone type FOOT SW jack: 1/4-inch TRS phone type MIDI OUT connector USB COMPUTER…
…mic connector INPUT 1-4: XLR jacks (2: HOT) INPUT A/B: XLR/TRS combo jacks (XLR: 2 hot, TRS: TIP hot) USB: USB Micro-B(audio interface, mass storage and Guitar Lab connexion functions) Note: Use a USB cable that supports data transfer. Operation using USB bus power is possible. REMOTE: ZOOM BTA-1…
…sound design and broadcasting. Inputs and Outputs Inputs The two locking combo connectors accept either XLR or ¼" balanced/unbalanced phone cables, handling mic- and line-level signals as well as instrument-level signals. Phantom Power of +24 or +48 volts can be applied to both inputs. Plus,…