RODE NTG5 BROADCAST SHOTGUN MICROPHONE LOCATION RECORDING KIT INCL NTG5, PG2R, WS10, ZP1, RM5, PG2R
…Voice Over microphone like the NTG3? Absolutely! The NTG3 is a legendary voice over mic, which is largely due to the extended low end but also very natural high frequencies. The NTG5 has a tightly controlled low end, and a very similar high frequency response to the NTG3 and will sound fantastic as…
RODE NTG3B PROFESSIONAL RF-BIAS SHOTGUN CONDENSER MICROPHONE - BLACK - TEN YEAR WARRANTY*
The RØDE NTG3 super cardioid shotgun microphone is designed for professional use on film, television, ENG and wherever high resolution broadcast audio is required. As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich warm quality and a full…
RODE PG2-R PISTOL GRIP MOUNT WITH RYCOTE LYRO SUSPENSION MOUNT FOR NT & NTG MICROPHONES PG2R
RØDE PG2-R Pistol Grip Shockmount with Rycote Onboard The PG2-R is a Pistol Grip Shock Mount designed to reduce handling noise when recording with shotgun microphones in hand held or boompole mounted applications. The PG2-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation…
RODE SM4-R SM4R WITH RYCOTE LYRE SUSPENSION MOUNT NTG1, NTG2, NTG3. NT3, NT4, NT5, NT55 - FOR MIC STAND OR BOOMPOLE
…various RØDE microphones onto a mic stand or boompole with 3/8" or 5/8" thread. The SM4-R is equipped with dual Rycote Lyre mounts to ensure maximum isolation from any handling vibrations, four possible mounting points to suit the complete range of compatible RØDE shotgun microphones,…
RODE BLIMP V2 COMPLETE WINDSHIELD AND SHOCK MOUNTING ACCESSORY FOR NTG1, NTG2, NTG3 MICROPHONES - 10 YEAR WARRANTY*
The RØDE Blimp is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in…
RODE NTG3 PROFESSIONAL RF-BIAS SHOTGUN CONDENSER MICROPHONE - TEN YEAR WARRANTY*
The RØDE NTG3 super cardioid shotgun microphone is designed for professional use on film, television, ENG and wherever high resolution broadcast audio is required. As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich warm quality and a full…
RODE WS7 MICROPHONE DELUXE WINDSHIELD FOR NTG3
Compatible microphones : NTG-3 The RØDE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of…
RODE RM5 STAND MOUNT CLIP FOR NT5, NT55, NT6, NTG1, NTG2, NTG3
Compatible microphones : NT5, NT55, NT6, NTG-1, NTG-2, NTG-3 The RM5 suits the NT5, NT55, NT6, NTG-1, NTG-2 and NTG 3 microphones. This light weight stand mount effectively secures your microphone to the stand without interfering with its polarity or frequency response.
RODE SM5 MICROPHONE SHOCK MOUNT FOR RODE SM4 SHOCK MOUNT FOR NTG1. NTG2, NTG3. NT3, NT4, NT5, NT55 W RING CLAMP ADAPTER
Compatible microphones : NT3, NT4, NT5, NT55, NTG-1, NTG-2 The SM5 is a suspension shock mount with ring clamp adaptor that allows the use of RØDE Microphones to be used with professional video cameras. It supports camera clamp mounts that effectively grip a 24 or 27mm barrel. Most cameras…
RODE SM3R CAMERA SHOE MOUNT WITH RYCOTE LYRE SUSPENSION MOUNT NT3, NT4, NT5, NT55, NTG1, NTG2, NTG3
…four possible mounting points to suit the complete range of compatible RØDE on-camera microphones, and integrated cable management clip. SPECS: - Weight: 54gm - Dimensions: 75mmH x 35mmW x 117mmD - Warranty: 1 year - Microphone compatibility: M5, NT5, NT55, NTG1, NTG2, NTG3, NTG4, NTG4+
RODE BOOMPOLE PRO CARBON FIBRE FIVE-SECTION PROFESSIONAL BOOM POLE - EXTENDS TO 3 METRES 10FT - BOOMPOLEPRO
…RØDE Boompole Pro weighs only 535gm (18oz) and, from a compact 810mm (2‘ 8”), extends to a full 3m (10’). Designed for use with professional shotgun microphones such as the RØDE NTG3 as well as the Blimp windshield system, the Boompole Pro joins RØDE’s…
RODE BOOMPOLE CARRY BAG - BOOMPOLEBAG
Compatible microphones : Boompole, Mini-Boompole, NTG-1, NTG-2, NTG-3, SM3, SM4. The BoomPole Bag is designed to carry the Boom-Pole (Mini or Standard) with mic (NTG-1 or NTG-2) and shock mount (SM3 or SM4) attached.
RODE NTG8 RF-BIAS LONG SUPER-CARDIOID SHOTGUN CONDENSER MICROPHONE - 10 YEAR WARRANTY*
Based on RØDE's award winning NTG3, the NTG8 is a broadcast quality RF-bias shotgun microphone that exhibits increased directionality across a wide frequency response range. This makes the NTG8 the perfect microphone for film, television, sports and outdoor broadcasting, live performance, and…
RODE DEADCAT MICROPHONE WINDSHIELD FOR VIDEOMIC, VMR NTG1, NTG2, WSVM
Compatible microphones : NTG-1, NTG-2, NTG-3, VideoMic The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. Weight 22.00gm Dimensions…
