RODE WSLAV WINDSHIELD FOR LAVALIER MIC - PRICE PER PACK
The WS-LAV is a high quality pop filter, designed to fit the Lavelier microphone. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule.
RODE WS2 MICROPHONE STUDIO WINDSHIELD FOR NT1A, NT2A,NT1000, NT2000, NTK, K2, BROADCASTER, NTUSB, PODCASTER
Compatible microphones : K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Broadcaster The WS2 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
RODE WS8 MICROPHONE DELUXE WINDSHIELD FOR NT5 NT55 NT6
The RØDE WS8 Deluxe Windshield is an easy to use high-performance windshield for RØDE's most popular small diaphragm condenser microphones, the NT5, NT55 and NT6. Designed to reduce wind noise when recording in adverse environmental conditions, the WS8 combines an open-cell foam…
RODE WSHS1P WINDSHIELD FOR HS1 HEADSET MIC PACK OF 3 SKIN COLOURED
The WS-HS1-P is a high quality pop filter, designed to fit the pink HS1-P headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule.
RODE WS5 MICROPHONE WINDSHIELD FOR NT5, NT55, NT6
Compatible microphones : NT5, NT55, NT6 The WS5 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
RODE WSHS1B WINDSHIELD FOR HS1 HEADSET MIC - BLACK - PACK OF 3
The WS-HS1-B is a high quality pop filter, designed to fit the black HS1-B headset. A pop filter should be fitted in the majority of applications to prevent any hard plosive sounds overloading the microphone capsule.
RODE DEADCAT VMPR VIDEOMIC PRO RYCOTE MICROPHONE WINDSHIELD - NOT SUITABLE FOR VMP+
DeadCat VMPR – Artificial Fur Wind Shield The DeadCat VMPR is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. The DeadCat VMPR is compatible with the…
RODE HS2P - PINK, LARGE - ULTRA LIGHTWEIGHT ERGONOMIC HEADSET MICROPHONE WITH 3.5MM JACK
…Pink, Large – Ultra Lightweight Ergonomic Headset The Headset Microphone You’ve Been Waiting For A complete redesign of the HS1, the HS2 combines the best features in the marketplace into one headset microphone. The revamp begins with the ear strips. The new flexible, silicone design…
RODE MINIFUR LAV ARTIFICIAL FUR WIND SHIELD WINDSHIELD FOR LAVALIER MIC PACKET OF THREE
The MINIFUR-LAV is a synthetic fur cover for the Lavalier microphone, designed for use in outdoor or high-wind conditions.
RODE WS9 DELUXE WINDSHIELD COMPRISED OF OPEN CELL FOAM AND FUR SLEEVE FOR VIDEOMICRO AND VIDEOMIC ME
WS9 Deluxe Wind Shield The WS9 is a deluxe microphone windshield for the RØDE VideoMicro and VideoMic Me, featuring open-cell foam covered by synthetic fur designed to minimise wind noise when recording outdoors.
RODE BLIMP V2 COMPLETE WINDSHIELD AND SHOCK MOUNTING ACCESSORY FOR NTG1, NTG2, NTG3 MICROPHONES - 10 YEAR WARRANTY*
…is a complete windshield and shock mounting accessory for the NTG1, NTG2 and NTG3 microphones, as well as any third party shotgun microphone up to 325mm (12 ¾”) in length. Now featuring the Rycote® Lyre suspension system, the Blimp provides the ultimate in microphone suspension and…
RODE DEADCAT MICROPHONE WINDSHIELD FOR VIDEOMIC, VMR NTG1, NTG2, WSVM
Compatible microphones : NTG-1, NTG-2, NTG-3, VideoMic The Dead Cat windshield is designed for minimising any wind noise when recording in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent. Weight 22.00gm Dimensions…
RODE WS3 MICROPHONE WINDSHIELD FOR NT3
Compatible microphones : NT3 The WS3 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
RODE WS4 MICROPHONE WINDSHIELD FOR NT4
Compatible microphones : NT4 The WS4 windshield provides additional protection for the microphone capsule against any wind noise or plosives.
RODE DEADCAT VMP VIDEOMIC PRO MICROPHONE WINDSHIELD
The DeadCat VMP is a furry wind cover for the VideoMic Pro, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE WSVM MICROPHONE WINDSHIELD FOR VIDEOMIC, NTG1, NTG2
Compatible microphones : VideoMic, NTG-1, NTG-2 The WSVM windshield provides additional protection for the microphone capsule against wind noise or plosives.
RODE DEAD WOMBAT ARTIFICAL FUR MICROPHONE WINDSHIELD FOR BLIMP
The DeadWombat windshield is designed for minimising wind noise when recording in high wind conditions using the RØDE Blimp. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE DEADCAT VMP+ PLUS FOR VIDEOMIC PRO+ PLUS MICROPHONE WINDSHIELD
…transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone. The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic…
RODE DEADCAT GO MICROPHONE WINDSHIELD FOR VIDEOMIC GO
The DeadCat GO is a furry wind cover for the VideoMic GO, designed for use in windy environments. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically transparent.
RODE WS7 MICROPHONE DELUXE WINDSHIELD FOR NTG3
Compatible microphones : NTG-3 The RØDE WS7 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS7 combines an open-cell foam surround with an outer layer of…
RODE DEAD KITTEN MICROPHONE WINDSHIELD FOR NT4, SVM STEREO VIDEOMIC, SVMP STEREO VIDEOMIC PRO, IXY, WS4
Compatible microphones : Stereo VideoMic, NT4 The Dead Kitten windshield is designed for minimising any wind noise when using the Stereo VideoMic or NT4 (with WS4 windshield) in high wind conditions. Its artificial fur is specially designed so as to minimise wind noise while remaining acoustically…
RODE WS6 MICROPHONE DELUXE WINDSHIELD FOR NTG1, NTG2, NTG4, NTG4+ SHOTGUN MICROPHONES
The RØDE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones. Designed to reduce wind noise when recording in adverse environmental conditions, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A…
RODE RC4 RUGGED FLIGHT CASE FOR NT4 STEREO MICROPHONE, RM3 STAND MOUNT, WS4 WINDSHIELD AND NT4 CABLES
RC4 Rugged Microphone Case The RC4 is a sturdy flight case designed to house an NT4 stereo microphone, RM3 stand mount, WS4 windshield and NT4 cables. SPECIFICATIONS Weight: 880.00g Dimensions: 300.00mmH x 350.00mmW x 100.00mmD
RODE RC5 RUGGED FLIGHT CASE FOR NT4 STEREO MICROPHONE, RM3 STAND MOUNT, WS4 WINDSHIELD AND NT4 CABLES
DESCRIPTION The RC5 is a sturdy flight case designed to house a matched pair of NT5 or NT55 microphones with stand mounts and windshields. SPECIFICATIONS Weight: 880.00g Dimensions: 300.00mmH x 350.00mmW x 100.00mmD
RODE M5 MATCHED PAIR STUDIO/LIVE MICROPHONES INCL 2X RM5 CLIPS & 2X WS5 WINDSHIELDS - GREAT FOR OVERHEADS/INTRUMENTS
…or anywhere you would employ a small diaphragm condenser microphone, either individually or as a stereo array. This matched pair has been carefully selected to ensure a variation of no more than 1dB sensitivity between the microphones. A premium foiled certificate is supplied to verify the…
NEUMANN WS87 WINDSHIELD FOR U87 - CALL FOR AVAILABILITY
Windscreen WS87 for U87 Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam. These windscreens do not cause interfering…
SENNHEISER MKE-600 VIDEO MICROPHONE
…indicator - Rugged all-metal housing - Very good suppression of structure-borne noise - Supplied with foam windshield and shock mount SPECS Dimensions: diameter 20 mm, length 256 mm Microphone: super-cardioid/lobar Frequency response: 40 Hz to 20 kHz Max. sound pressure level: 132 dB SPL at P48; 126…
SENNHEISER MKE 400 VIDEOMIC MICROPHONE
…time (from a single AAA battery) - Integral shock-mount for rejection of handling noise - Foam windshield included SPECIFICATIONS Dimensions: 130 x 21 x 62 mm Frequency response: 40 - 20000 Hz Microphone connector: 3,5 mm stereo mini jack Equivalent noise level: 21 dB (A) (\"vol -\") 16 dB (A)…
RODE NTG1 LIGHTWEIGHT SHOTGUN CONDENSER MICROPHONE - TEN YEAR WARRANTY*
…from being recorded. The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications. The RØDE NTG1 shotgun microphone is covered by RØDE Microphones' industry leading 10 year warranty.…
BEYERDYNAMIC MC930 STEREO SET 2X TRUE CONDENSER MICROPHONE (CARDIOID)
…930 STEREO SET True Condenser Microphone (cardioid) stereo set FEATURES - Set consisting of two MC 930 with elastic suspension and windshield - Suitable for use in professional studios and difficult acoustic environments - High-quality small-diaphragm microphone providing a wide frequency response…
