…to your patches so you can create more unique sounds. Eurorack Ready Installing the 904B VOLTAGE CONTROLLED HIGH PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This…
…● Robust steel and aluminium frame ● Comfortable padded handle for pain-free travel ● Configurable layout to suit any style of play ● Power module: power supply with 1600mA +12V output, 1600mA -12V output and 900mA +5V output. 5HP width. ● Space to connect up to 20 modules ● Link system: connect…
…FEATURES - High-performance power supply module for Eurorack - Ultra-low noise power supply through two flying bus boards - Eurorack specs: 4 HP, 1,000 mA +12 V, 1000 mA -12 V, 500 mA +5 V - LED Indicators on each power rail - Designed and engineered in the U.K. Eurorack Ready Installing the CP1A is…
SYR-E84 Eurorack Case DURABLE EURORACK CASE WITH SUPER-CLEAN, HIGH-CAPACITY POWER SUPPLY From studio production to live performance, Eurorack-based modular synthesis has exploded in popularity around the world. For portability, protection, and usability, a quality case and power supply is an…
…4.21“H (with knobs) x 5.24“D - Weight: 3.5 lbs. - Power Consumption: 2.8W - Included Power Supply: 100-250VAC, 50-60Hz, +12VDC 1A - Patchbay: 32x 3.5mm jacks - Rear Panel Audio Out: ¼” Headphone / Audio EURORACK SPECS - Current Draw: 230mA (+12V – from 10-pin header) -…
EURORACK RACK 19" Desktop/Rack-Mount Kit with Power Supply for 84 HP Eurorack The EURORACK RACK is ideal for any Behringer Eurorack-style synthesiser or equipment. This desktop/rack-mount kit converts a 19” rack into an 84 HP Eurorack chassis. A compact 4 HP power supply with two flying bus…
…be used to determine the length of a sequence between 1 and 16 steps. Eurorack Ready Installing the 182 SEQUENCER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the…
…output allowing the VCA to be used independently when in UNMOD mode. Eurorack Ready Installing the MODAMP MODULE 1005 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for…
…patches and deliver more compelling sounds from one source. Eurorack Ready Installing the SYSTEM 100 173 QUAD GATE/MULTIPLES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This…
…access to all important parameters with one module. Eurorack Ready Installing the 904A VOLTAGE CONTROLLED LOW PASS FILTER is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This…
…904B HPF modules for an unlimited number of sonic combinations. Eurorack Ready Installing the 992 CONTROL VOLTAGES is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the…
…with the Delay control to phase lock the LFO to your keyboard playing. Eurorack Ready Installing the 140 DUAL ENVELOPE/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 140…
…to other modules in both negative and positive polarity. Eurorack Ready Installing the DUAL ENVELOPE GENERATOR MODULE 1003 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows…
…to other modules in both negative and positive polarity. Eurorack Ready Installing the DUAL ENVELOPE GENERATOR MODULE 1033 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows…
…finally a VCA output to feed the processed signal to other modules. Eurorack Ready Installing the FILTAMP MODULE 1006 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for…
…Set is made for Eurorack, so you can easily expand by connecting to the wide-range of available Eurorack modules. Or it can neatly integrate into your existing modular setup. Its versatile wood and metal case can sit flat or tilt, and provides plenty of clean, stable power. It blends with the…
…power supplies to create a beautiful triple row, 270hp desktop eurorack case. The perfect enclosure for any modular synthesizer laboratory. FEATURES EP-270 Power 4 Amps of Clean, Filtered +12v Power 3 Amps of Clean, Filtered -12v Power 2 Amps of Clean, Filtered +5v Power Case Wide 2 Channel Eurorack…
…- High power auto-ranging universal switch-mode power supply for worldwide use - Designed and engineered in the U.K. Massive Power Supply One of the features that separates EURORACK GO from competing products is the massive, ultra-low noise power supply. The auto-ranging universal switch-mode supply…
…the outputs can send two different signals to separate modules. Eurorack Ready Installing the 914 FIXED FILTER BANK is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the…
…or use them to create some percussive sounds for a real groovy drum beat. Eurorack Ready Installing the 923 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 923…
…In Knobs that control the amount of signal that goes through the Mod In jacks. Eurorack Ready Installing the 130 DUAL VCA is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the 130 to…
…● Robust steel and aluminium frame ● Comfortable padded handle for pain-free travel ● Configurable layout to suit any style of play ● Power module: power supply with 1600mA +12V output, 1600mA -12V output and 900mA +5V output. 5HP width. ● Space to connect up to 32 modules ● Link system: connect…
…with 96hp of space available and plenty of power for both analog and digital modules. FEATURES EP-96 Power - 1.5 amps of Clean +12v Power - 1.5 amps of Clean -12v Power - 1 amp of Clean +5v Power - 12 Keyed Eurorack Power Headers - External Power Button - Universal Earth Grounded DC Adapter…
…A beautiful 96hp eurorack enclosure shaped with the warmth of walnut and the strength of steel. The Lifeforms Research Console eurorack format modular case pairs classic desktop synthesiser ergonomics with a modern eurorack form factor and reliable power supply. The Lifeforms Research…
…so you can shape and sculpt sounds that are sure to blow everyone away! Eurorack Ready Installing the CP35 is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the CP35…
…allow you to create more intricate patches and hours and hours of fun. Eurorack Ready Installing the CP3A-O is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the CP3A-O…
…powered eurorack travel case with lid. Includes a heavy duty, internal power supply designed to exceed the needs of the most demanding analog and digital eurorack systems. EP-208 Power - 4 amps of Clean +12v Power - 3 amps of Clean -12v Power - 2 amps of Clean +5v Power - 30 Keyed Eurorack Power…
…inverted output jacks are ideal for creating ensemble and stereo effects. Eurorack Ready Installing the 172 PHASE SHIFTER/DELAY/LFO is designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the…
…other modules to create more intricate patches and hours and hours of fun. Eurorack Ready Installing the CP3A-M is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This allows for the…
…patches that are perfect for your next studio session or jam. Eurorack Ready Installing the 921 VOLTAGE CONTROLLED OSCILLATOR is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and screw in the module using the included screws. This…
…to feed multiple noise and CV signals to other modules. Eurorack Ready Installing the DUAL NOISE/RANDOM VOLTAGE MODULE 1016 is easy as it is designed to fit into a standard Eurorack case. Just connect the power cable to the power supply and screw in the module using the included screws. This allows…
…modulation signal, like an LFO, into any of the 3 CV inputs per VCO. Eurorack Ready Installing the 112 DUAL VCO is simple as it was designed to fit into a standard Eurorack case. Just connect the power cables to the power supply and mount the module using the included screws. This allows for the 112…