RODE PSA1 PROFESSIONAL STUDIO ARM MICROPHONE STAND - IDEAL FOR PODCASTING
Compatible microphones : Procaster, Podcaster The PSA1 is a studio boom arm for radio, broadcast, studio and home use.It provides full 360 degree rotation. The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and…
GIBRALTAR CYMBAL BOOM ARM
GIBRALTAR CYMBAL BOOM ARM * 7⁄8″ diameter, 14″ down tube * 12.7MM diameter, 16″ boom * Fitted with gear tilter (1/pack)
GATOR FRAMEWORKS TRIPOD MIC STAND WITH TELESCOPING BOOM AND STANDARD TWIST CLUTCH
…boom and standard twist clutch ADAPTABLE CLIP FITTING The adaptable microphone clip fitting easily accommodates both US and Euro mic clips. CABLE MANAGEMENT Removable and adjustable cable management clips keep your setup clean, organized and safe. TELESCOPING BOOM ARM The telescoping boom arm gives…
QUIKLOK A107BK SIDE CLAMPON BOOM ARM MIC STAND ATTACHMENT BLACK
Clamp-on Boom Arm Attachment for adding extra microphones without more stands congestions. Perfect for micing saxophones, drums, acoustic guitars, etc. Heavy, thick metal clamp securely attaches to mast of any standard mic stand.Rubber-tipped 8 mm lock screw will not strip-out when tightened or…
QUIKLOK A156 CLAMP ON TELESCOPIC BOOM ARM MIC STAND - TABLE OR PIANO OR MULTI ATTACHMENT - BLACK
The A156 Clamp on microphone telescopic Boom arm is designed for Acoustic grand pianos, giving you the optimum location for mic placement when recording or during live performance. It is also handy for clamping on to desktops.
RODE PODMIC DYNAMIC PODCASTING MICROPHONE
…construction With an all-metal construction, the PodMic is built to last. The robust swing-arm mounting matches perfectly to the RØDE PSA1 boom arm for ultimate flexibility and convenience. End the Pops The end-fire dynamic capsule is protected by a stainless steel mesh grille and a…
MEINL XHAT AUXILIARY HIHAT ARM WITH CLAMP
X-Hat Auxiliary Hihat Arm The MEINL X-Hat Auxiliary Hihat Arm keeps a pair of hihat or stack cymbals in a stationary position anywhere on a drum set up. The clamp and boom arm make it easy to attach and position at any height or angle. The tension adjustment makes it possible to finely adjust the…
QUIKLOK Z728 ADJUSTABLE ADD ON MIC BOOM ARM FOR Z SERIES KEYBOARD STAND
…MIC BOOK FOR Z SERIES Fully Adjustable Telescopic Mic Boom Can be mounted on either side of any "Z" stand (except Z-722 and Z-722L) Note: does not require Z-720 or Z-720L accessory bars. Height adjustability: 15.75" to 26.75" - 40 to 68 cm Boom length range: 22" to 40" - 56 to 102 cm Weight: 3.3 lb…
AUDIX PD133 STUDIO MICROPHONE DUAL LAYER POP FILTER SCREEN
…which is terminated into a 5/8" threaded housing. This piece may be use a stand-along piece and screwed directly on to the top of a mic stand or boom arm if desired. The rest os the PD-133 consists of flexible metal gooseneck and a stand holder that can attach to any size mic stand up to a diameter…
NEAT MICROPHONES BUMBLEBEE DESKTOP MULTI-PATTERN USB MICROPHONE
…audio device with a USB input. Extra features include fully integrated headphone monitoring with volume control, mic gain control, a clever boom arm with swivel capsule for optimum positioning, Honeycomb pop filter, custom USB cable designed for digital audio, and the option to generate…
PEARL CH70 MINI BOOM HOLDER PLUS ADAPTOR
The CH-70 features a cymbal boom arm and integrated quick-release mounting bracket for applications, such as mounting splash cymbals, where full-size stands are not required.
QUIKLOK SL915 ADD ON TREAD ADAPTOR TO FIT BOOM ARMS - MUSIC STANDS TO 913 SERIES KEYBOARD STANDS
Necessary to attach an optional laptop or tablet holder to the SL913ALU keyboard stand.
LUDWIG ATLAS MINI BOOM CYMBAL ARM LAS1MB
LAS1MB Mini-Boom Arm SPECS * Mini 12mm cymbal boom. * Gearless Aero Tilter. * Attachable with any mounting clamp or auxiliary port.
AUDIX MB5050HC 50 INCH CARBON FIBER BOOM WITH M1250HC MICROPHONE, CLUTCH ASSEMBLY & CABLE. 18-52V PHANTOM POWER
…MICROBOOM24 - 24” carbon fiber boom arm with clutch assembly MICROBOOM50 - 50” carbon fiber boom arm with clutch assembly MICROBOOM84 - 84” carbon fiber boom arm with clutch assembly MODELS AVAILABLE WITH MICROPHONE: MB5050 - 50" carbon fiber boom, clutch assembly, & M1250B…
GIBRALTAR SCRBA BOOM ATTACHMENT DRUM RACK PART
Rack Tube Boom Attachment Fits over any 1 1/2" dia rack tube and allows mounting of most popular cymbal boom arms
DW BOOM ARM SM934
DW Cymbal Arms are perfect for adding cymbals to an existing stand by either stacking them on top of a primary cymbal with DW's Straight or Offset Cymbal Stackers, or by using a combination of DogBones or Mega Clamps to turn your single cymbal stand into a multi-cymbal stand.
DW G3 WITH SM912 BOOM ARM
DW G3 WITH SM912 BOOM ARM The DW SMMG6 Cymbal Holder is a boom arm cymbal holder with DW SMMG3 Clamp, Infinitely adjustable tilter, and Memory Lock. SPECS * Dw Cymbal Boom Arm with SMMG3 Clamp * DW TehcLock Technology * Infinitely Adjustable Tilter * Memory Clip
DW 1/2 INCH BY18 INCH BOOM CYMBAL ARM WITH MEMORY LOCK
WSM912 - 1/2-inch by 18-inch Boom Cymbal Arm with memory lock. Fits into boom tilter, DogBone or Mega Clamp eye bolt.
SONOR 600 SERIES MINI BOOM CYMBAL STAND
…suits each drummer’s individual set-up. Retractable Boom Arm – Two in One Completely retractable cymbal boom arm converts the mini boom stand to a straight cymbal stand. SPECIFICATIONS Finish: Chrome plated Item name: Mini Boom Cymbal Stand Series: Hardware 600 Item description: MBS 673…
GIBRALTAR FLAT BASE BOOM CYMBAL STAND
…lock * Casted SUPER LOCK HEIGHT ADJUST, Hinged height adjust with ABS protective tube inserts * Gearless Brake Tilter gives 360 positioning, fitted with drum key lock for extra security * Hideaway boom arm * Extends 24” to 58” with 5⁄8” – 7⁄8” diameter tubes
MAPEX ARMORY BOOM CYMBAL STAND BLACK PLATED
…cymbal positioning and collapses further for compact storage. - Multi-Step Boom and Super-Glide Stepless Cymbal Tilter SPECS: - Falcon Series Quick Release Cymbal Lock - Multi-Sustain Cymbal Felts - Knurled Hideaway Boom Arm - Black - 3-Tier Telescoping Tubes - Clamp-Style Memory Locks - Concave…
GIBRALTAR CYMBAL BOOM STAND DOUBLE BRACED
…height adjustment with ABS protective tube inserts and wing tension memory lock * Nylon collar inserts for no metal to metal contact * Hideaway boom arm with hinged memory lock * Gearless Brake Tilter gives 360 positioning, fitted with drum key lock for extra security * Extends 30″ to…
DW 9000 SERIES CYMBAL BOOM STAND
DW 9000 SERIES CYMBAL BOOM STAND The industry-standard, industry-leading line of 9000 Series hardware is DW's most popular. Heavy-duty steel constructions means it built to withstand the punishment that long tours can dish out, but it’s a long list of patented innovative features that keeps…
GIBRALTAR CYMBAL STAND MINI BOOM ULTRA ADJUST TURNING POINT 9709UATP
…height adjustment with no metal to metal contact and wing nut adjustment • 20” second tier with Ultra Adjust gearless position arm • Solid 10”mini hideaway boom arm • Tripod height memory lock with exclusive Round rubber foot design that adds stability at any position
GATOR FRAMEWORKS ADJUSTABLE TRIPOD MICROPHONE STAND WITH TELESCOPING BOOM
…close CAM levers on the patented telescoping boom arm allow you to quickly flip them open, slide the arm to the perfect length and snap down to lock it all in place. TELESCOPING BOOM The patented telescoping boom arm expands up to 26″. Once the boom is set in place, a unique swivel grip allows…
DW 7000 SERIES CYMBAL BOOM STAND SINGLE BRACED
DW 7000 Series Boom Stand Made especially for the working drummer, 7000 Series single-braced hardware is perfect for the weekend trap case. Included are all the features you’d expect from DW, but without the added weight. Lighter-gauge tubing and single braced tripod legs are easier to carry,…
ROLAND MDY25 CYMBAL ARM & PAD HOLDER FOR DRUM RACK STAND
New cymbal mount for the MDS-25 with a flexible ball-clamp and newly designed mechanical arm. Provides dual-mount options for boom and straight.
PEARL CLH930 CLOSED HIHAT WITH UNILOCK TILTER
The CLH-1000 Pear Closed Hi Hat features a boom arm with stop-lock and Pearl's infinitely adjustable Uni-Lock tilter for ultra-precise positioning, versatility, and ease-of-use.
ROLAND MDYSTD CYMBAL STAND INCL CLAMP FOR MDS SERIES STANDS
…V-CYMBAL PADS The MDY-Standard is a mount for V-Cymbal pads. It features a flexible ball-clamp tilter, a boom arm and a clamp that’s compatible with all Roland MDS-series drum stands for expanding your setup with more cymbals. Provides options for boom and straight cymbal mounting positions.
ROLAND MDYSTG CYMBAL STAND MOUNT FOR MDS25 AND MDS50KV
MDY-12 Cymbal Mount The MDY-12 is a cymbal mount for V-Cymbal Pads. It features a flexible ball-clamp, a foldable boom arm, and a hatched clamp that’s compatible with all Roland MDS-series drum-rack hardware for expandability. Set up and teardown is fast and easy.
