GUITAR TECHNOLOGY TREMOLO ARM - CHROME - 5.2MM THREADED - STRAT-STYLE
18-inch arm section 12.7mm dia with standard grabber clamp. Note: Cymbal NOT included
GUITAR TECHNOLOGY TREMOLO ARM - BLACK - 6.0MM THREADED - NO TIP Image shows the chrome option. Dimensions are the same.
Compatible microphones : Procaster, Podcaster The PSA1 is a studio boom arm for radio, broadcast, studio and home use.It provides full 360 degree rotation. The PSA1 has a horizontal reach of 820mm, and a vertical reach of 840mm. It is supplied with velcro cable wraps and both desk-clamp and…
Cymbal Boom Arm Ratchet Tilter 7/8" dia tube 13.8" down tube length.
DW Cymbal Arms are perfect for adding cymbals to an existing stand by either stacking them on top of a primary cymbal with DW's Straight or Offset Cymbal Stackers, or by using a combination of DogBones or Mega Clamps to turn your single cymbal stand into a multi-cymbal stand.
TA 628 AX-4 Tom Arm Technical Information Hardware: 600 Series Features: for H-Bar
…hardware at an unbeatable price. Equipped with lots of individual components, the 4000 Series is easy to set up, adjust and tear down. New tom arms The Tom Arms now feature flexible open ball clamp and short hex rods, which enable easier adjustment and rotation motion. New wing screw / wing nuts New…
T1 ToneMatch audio engine microphone stand bracket Enables T1 ToneMatch audio engine to be mounted to a microphone stand.
DESCRIPTION LAS1MB Mini-Boom Arm Mini 12mm cymbal boom. Gearless Aero Tilter. Attachable with any mounting clamp or auxiliary port.
Turning Point Short Boom Arm Gibraltar’s Turning Point Short Cymbal Hideaway Boom Arm with brake tilter is a great way to add cymbals to your set up without adding another cymbal stand tripod to your set up. This boom arm can be clamped on to any cymbal stand or rack set up without adding more…
TH-88 Series tom holders share the same dimensions as the TH-100 series but feature gear tilters with 60 teeth.
Sonor TA678 6000 Series Tom Holder Features: *Ball style tilter *Hex style tom shaft
Large 12.7mm L-Rod Ball Arm 12.7mm L-Rod with 7/8" down tube. Mounting Reference Guide 12.7 mm arms - Fits most DW, Gretsch, and Gibraltar SC-STL2 and SC-STL3 tom brackets.
Medium 10.5mm L-Rod Ball Arm 10.5mm L-Rod with 7/8" down tube. Mounting Reference Guide 10.5mm arms - Fit most Tama, Premier, Pacific, Taye, Ayotte, Roland Electronic pads, current Remo drums.
The Gibraltar Rack Clamp with Arm Assembly is a percussion rack bar clamp with L-Rod ratchet assembly.
Clamp-on Boom Arm Attachment for adding extra microphones without more stands congestions. Perfect for micing saxophones, drums, acoustic guitars, etc. Heavy, thick metal clamp securely attaches to mast of any standard mic stand.Rubber-tipped 8 mm lock screw will not strip-out when tightened or…
Model: CH830S Tilter: Uni-Lock Diameter: 7/8" Diameter Post with Stop Lock
GUITAR TECHNOLOGY TREMOLO ARM - CHROME - 6.0MM NO TIP
GUITAR TECHNOLOGY TREMOLO ARM - BLACK - 6.0MM COLLARED - FLOYD ROSE STYLE
GUITAR TECHNOLOGY TREMOLO ARM - CHROME - 5.0MM THREADED - USA STRAT STYLE
GUITAR TECHNOLOGY TREMOLO ARM (LEFT HANDED) - BLACK - 6.0MM COLLARED - FLOYD ROSE STYLE Image shows the right handed option. Dimensions are the same.
GUITAR TECHNOLOGY PA004CR TREMOLO ARM - CHROME - 6.0MM COLLARED - FLOYD ROSE STYLE Image shows black option. Dimensions are the same
ROLAND MDY 12 CYMBAL ARM & PAD HOLDER FOR DRUM RACK STAND The MDY-12 is a cymbal mount for V-Cymbal Pads. It features a flexible ball-clamp, a foldable boom arm, and a hatched clamp that’s compatible with all Roland MDS-series drum-rack hardware for expandability. Set up and teardown is fast and…
Short arm hanger designed for uke and small guitar fret board width. Attractive 2 screw wooden base allows you to mount horizontally or vertically - although vertically is recommended. Complete with screws and wall plugs.
…Less than 1 sec with 33 1/3 rpm Less than 1 sec from 45 to 33 1/3 rpm Audio Output: Phono output Tone Arm Section Measurement Tone arm type: Static balanced straight shaped tone arm with cardan's suspension Effective Arm Length: 191mm Tracking Force Range: 0-4g Applicable Cartridge Weight: 6-10g
…that supports many large diaphragm RØDE microphones. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It includes a removable pop shield with two axes of adjustment and a telescopic arm for ultimate application versatility.
New cymbal mount for the MDS-25 with a flexible ball-clamp and newly designed mechanical arm. Provides dual-mount options for boom and straight.
QUIKLOK Z728 ADJ MIC BOOK FOR Z SERIES Fully Adjustable Telescopic Mic Boom Can be mounted on either side of any "Z" stand (except Z-722 and Z-722L) Note: does not require Z-720 or Z-720L accessory bars. Height adjustability: 15.75" to 26.75" - 40 to 68 cm Boom length range: 22" to 40" - 56 to 102…