Backbeat Radio
Electric GuitarsAcoustic GuitarsAmplifiers
PickupsEffectsStrings/Picks
Accessories

RODE STEREO VIDEOMIC STEREO CONDENSER MICROPHONE WITH INTEGRATED SHOCKMOUNT HPF & PAD

STOCK CODE: RODSVM

RODE STEREO VIDEOMIC STEREO CONDENSER MICROPHONE WITH INTEGRATED SHOCKMOUNT HPF & PAD - TEN YEAR WARRANTY*

$399.00

Our Price$269.00

CLEARANCE STOCK WITH WARRANTY Click here for details

The RØDE Stereo VideoMic is a broadcast quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.

Two high resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.

The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.

An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (Note that cameras with proprietary sized mounts may require an additional adaptor).

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.

The Stereo VideoMic is ideal for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2.

The RØDE Stereo VideoMic is covered by RØDE Microphones' industry leading 10 year warranty.

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter
Capsule 0.50"
Polar Pattern Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options 9V Battery
Weight 288.00gm
Dimensions 65.00mmH x 102.00mmW x 170.00mmD
Output Minijack Output


CLEARANCE INFORMATION

Clearance Stock with/without Warranty

Terms and Conditions

We are clearing this stock at reduced prices.

-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item; 
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.

While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.

Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.

We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate. 

E & OE

Freighting - Goods can be freighted to your local store on your behalf.

Goods may incur a freight charge depending on :

-the type of goods (e.g. large or heavy)
-the time frame in which you require them

Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.

Condition -All goods will be tested and sent in working condition.

All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.

The warranty status will be noted on your invoice.

No representation is made regarding the fitness of the product for your particular purpose, application or installation.

Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).

Please note that there are no refunds or exchanges on sale items or clearance store stock.

Quick Weekly Payments on $269.00
  • 12 mths$7.77
  • 24 mths$4.68
  • 36 mths$3.72
  • $229.00

    RODE BOOMPOLE MICROPHONE POLE EXTENDS FROM 0.85 METRE 33.5 INCH TO 3.3 METRE 127.5 INCH

    More Info
  • POA

    RODE STEREO VIDEOMIC PRO XY STEREO CONDENSER MICROPHONE W INTEGRATED SHOCKMOUNT HPF & LEVEL CONTROL - 10 YEAR WARRANTY

    More Info
  • $19.99

    RODE VXLR 3.5MM MINI JACK TO XLR CONNECTOR FOR VIDEOMIC

    More Info
  • $139.00

    RODE PG2 PISTOL GRIP SHOCK MOUNT

    More Info
  • $189.00

    RODE MINI BOOM MICROPHONE POLE EXTENDS FROM 0.84 METRE 33 INCH TO 2.1 METRE 83 INCH

    More Info
  • $69.00

    RODE DEAD CAT MICROPHONE WINDSHEILD FOR VIDEOMIC, NTG1, NTG2, WSVM

    More Info
  • $39.00

    RODE STEREO VIDEOMIC CARRY BAG

    More Info
  • $29.00

    RODE WSVM MICROPHONE WINDSHIELD FOR VIDEOMIC, NTG1, NTG2

    More Info
  • $25.00

    RODE VC1 VIDEOMIC STEREO MINI JACK 3.5MM EXTENSION CABLE FEATURING TWO CORE SHIELDING AND A GOLD PLATED JACK & SOCKET

    More Info
  • $39.00

    RODE PG1 COLD SHOE PISTOL GRIP SHOCK MOUNT

    More Info
  • $69.00

    RODE DEAD CAT VIDEOMIC PRO MICROPHONE WINDSHIELD

    More Info