Reloop RMX-80 DIGITAL A heavyweight has just entered the ring!
With the introduction of the RMX-80 Digital, Reloop is proud to set a new standard in professional club mixers. The RMX-80 Digital comes loaded with an impressive wealth of features and innovations, staking its claim for the crown among todays choice professional DJ tools.
This fully digital mixer powerhouse offers everything a modern professional desires in a DJ-friendly control centre. The mixer surface is laid out clearly, offering intuitive control of the 4+1 channels, a clear terminal panel for up to 9 signal sources, 2 mic inputs with 'active ducking technology', digital effect unit with a large-scale display, 2 headphones outputs with intelligent 1-knob headphones EQ, crossfader assignment, as well as fader and crossfader-start. The bipolar filter section combined with the switchable kill/classic EQ offers unimagined flexibility in the frequency spectrum. Steplessly adjustable fader and crossfader curves allow everything from hard cuts to smooth mixes. Two independent beat counters with 'intelligent tempo detect' complete the RMX-80 Digital.
The 13 brand-new, high-quality performance effects offer unseen creative potential for extensive live remix sessions. For added credibility, these effects were developed in close cooperation with professional DJs with respect to club suitability. The globally unique time bar buttons allow direct access to effect modulation. Depending on the selected effect, they serve as trigger buttons for loops, LFO, timing or pitch. The large LCD display shows all of the important information, and provides a clear overview during creative sesions.
Reloop has always strived for the consistent development of proven concepts. Consequently, the RMX-80 Digital offers the classic solo cue mode as well as an extended mix cue mode which enables monitoring of several channels at the same time. Another addition that satisfies the demands of modern DJs is the USB hub which is a unique but essential feature as it counters the usual lack of USB ports on laptops. A further key feature is that the RMX-80 Digital can be adapted to every imaginable performance situation thanks to the extensive setup utility menu. From here, it's possible to individually customize various settings including output zone routing, limiter and talkover threshold, and EQ crossover frequencies.
The RMX-80 Digital is part of the new Reloop premier line product family, becoming the first choice solution for an affordable state of the art club mixer.
Inputs: 7x line, 2x phono, 2x mic, return
Outputs: Master 1 XLR balanced, master 2 RCA unbalanced, rec, booth, send
Frequency range: 20 Hz - 20 kHz
EQ range classic: +12 dB/ < -26 dB
EQ range isolator: +12 DB/ -8 dB (total kill)
Dimensions: 320 x 107.5 x 382.4 mm
Weight: 6.9 kg
4+1 channel performance club mixer
Fully digital architecture for outstanding sound and flexibility
Future-proof thanks to innovative, updatable firmware system
Setup utility mode for extensive control and setting possibilities (master, limiter, solo/mix cue, isolator crossover, talkover threshold, mic-to-booth, cue-to-booth, LED check, factory reset, firmware update)
13 high-quality performance effects in studio quality (flanger, delay, echo, reverb, transformer, pitch shift, loop roll, reverse loop, noise, bitcrusher, gate, tape delay, send/return)
Direct access to effect modulation (trigger, LFO, time, pitch) via time bar buttons
2 independent beat counters with ''intelligent tempo detect''
Large, well-structured LC display for all important functions
Bipolar filter per channel
Adjustable EQ characteristics (kill & classic)
Fader & crossfader-start
Mic channel with 2-band EQ & talkover ''active ducking technology'' for mic channel
Intelligent 1-knob equalizer and mono/stereo switch for headphones
Active 3-way USB hub for additional audio interface or controller
Individual zone routing
Symmetrical (XLR) as well as asymmetrical (RCA) outputs
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.