The MF Flange is a 100% analog BBD based harmonic manipulator with a dedicated voicing switch and mono or stereo output capabilities. The two-position Type switch toggles between two voice modes: vocal or a traditional flanger.
Rate: At Minimum position sweeps are gradual and fluid. As rate is increased, the movement becomes tighter and more focused. At maximum position, the modulation sound becomes is rapid and transitions to hard, percussive pulsing.
Depth: Determines the amount of modulation applied to the delay time. As depth is increased, the sound transitions from light motion and phasing all the way into massive multi-octave sweeps.
Time: At maximum position you can easily craft traditional or vocal, metallic flange sounds. As the Time control position is reduced, delay time is increased and sounds become thicker and warmer. At Minimum position, the MF Flange is capable of approaching analog chorus.
Feedback:This control brings focus and resonance to the sweep of a sound. At minimum position, sweeps are smooth and neutral. At medium position, sweeps begin to peak musically. At maximum position, the sound of a sweep becomes rigid and metallic.
TYPE: The lower position subtracts feedback from the input signal mixer and output dry signal creating a more vocal sound. In the Upper position, feedback is positively summed with the input signal and dry signal, producing a more traditional flanger sound.
EXPRESSION PEDAL INPUT: This input is assigned to the Time control. Use an expression pedal to manually sweep through the delay frequency range of the MF Flange.
To access both outputs (in bypass), you will need to remove the bottom of the MF Chorus and set this switch to Stereo. Then use a ¼” TRS to TS insert cable or TRS to TS splitter.
WARNING: When set to Stereo and in bypass, excessive loading may occur. To avoid this, set this switch to Mono. A stereo output will still be present.
• True Bypass
• 100% analog wide-range Flange
• Extreme time and phase manipulation possibilities
• Mono or Stereo out
• Designed to perform with any Guitar, Amp, or Bass guitar configuration
PRELIMINARY SPECIFICATIONS (Specifications subject to change)
SIGNAL PATH: 100% Analog
BYPASS TYPE: True bypass
WEIGHT: 18oz (0.5kg)
ENCLOSURE: Cast aluminum
DIMENSIONS: D=5.75” (14.4 cm) W=3.25” (8.3 cm) H=2.25” (5.8 cm)
DELAY TIME: <0.540mS – 16mS (0.340-20mS with modulation)
LFO RATE : <.025Hz - >11Hz
LFO SHAPE: Exponentiated Triangle
EXPRESSION: Controls Time (Max Input level +5VDC)
INPUT IMPEDANCE: >1 MegaOhm
OUTPUT IMPEDANCE: 1000 Ohm Max
MAX INPUT LEVEL: +7.5dBμ
MAX OUTPUT LEVEL: +10dBμ
CURRENT: 18mA Nominal / 22mA Max
STEREO OUTPUT MODES:
TYPE SWITCH UP - Left (Mono) Output = Dry + Wet / Right Output = Dry - Wet
TYPE SWITCH DOWN - Left (Mono) Output = Dry - Wet / Right Output = Dry + Wet
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.