The MF Drive is a unique, filter-based overdrive pedal that employs a Moog Ladder Filter, boutique FET amplifiers, and classic OTAs in its drive section making it highly reactive to input gain and picking dynamics. The bi-polar tone control and sweep-able filter work with input gain to offer each player completely customizable sounds from creamy British overdrive to cranked American tube amplifier and even fuzz. When the filter Peak switch is engaged and an expression pedal is connected, the harmonic content is shifted to the filter’s cutoff position adding tonal and dirty wah performance possibilities not found elsewhere.
GAIN - Sets the input level sent through the OTA before passing through the 4-pole Moog Ladder filter. At lower settings, the MF Drive is cleaner with a smooth breakup. As Gain increases, OTA and filter distortion increase causing the MF Drive to become more aggressive and reactive to picking dynamics
DRIVE - In the down position the Gain knob range is from +6.8dB to +48dB. In the up position the gain range is from +16dB to +57dB. This allows for extended control over gain-staging the input of the MF Drive.
FILTER - Interacts heavily with the Tone knob and filter Peak switch. With Peak off, the filter can be used to reduce top end and add heft to an amplifier. With Peak engaged, the filter can be used to add low, mid, or high frequency boost to your instrument. The MF-Drive by nature has a large bottom end, so this position is extremely useful for dialing in a more focused guitar tone.
PEAK - When engaged, Peak creates a +15dB boost at the Filter cutoff. It is extremely useful for accentuating mid-range or high frequencies. When paired with an expression pedal, Peak unlocks a whole new range of performance sounds.
TONE - A variable Lowpass/Mid-Scoop/Highpass voicing section sent through a boutique FET for color. At minimum, the sound is dark and full. Approaching the Mid position the sound varies from a slightly scooped American tube amp to a more British, mid-forward tone. At maximum position, the sound is present and articulate with a smooth, rolled of low-end.
OUTPUT - The output level of the MF-DRIVE is extremely hot to offer a wide range of tones from clean to dirty. With proper gain-staging, the MF Drive can also be used as a boost or wah pedal.
EXPRESSION PEDAL INPUT - This input is assigned to Filter cutoff. Use it for massive swells or engage filter Peak to create a tunable dirty wah. This setting sounds amazing on bass guitar.
- True Bypass
- Designed to sound and feel like a cranked tube amplifier without the noise
- Extremely reactive to input volume and picking dynamics.
- American and British amplifier versatility that when pushed approaches Fuzz
- Works great as a dirty boost for high gain amplifiers
- Expression pedal control of the filter creates a tunable, dirty wah
- Designed to perform with any Guitar, Amp, or Bass guitar configuration
SIGNAL PATH: 100% Analog
BYPASS TYPE: True bypass
WEIGHT: 18oz (0.5kg)
ENCLOSURE: Cast aluminum
DIMENSIONS: D=5.75” (14.4 cm) W=3.25” (8.3 cm) H=2.25” (5.8 cm)
DRIVE SWITCH: Down+6.8dB to +48dB gain /Up +16dB to +57dB gain
PEAK: +15dB resonance peak at the filter cutoff frequency
TONE CONTROL: (Min): Lowpass -6dB at ~ 1KHz, (Center): -6dB Scoop at 800Hz, (Max): Highpass -6dB at ~ 1KHz (-18dB shelf)
LADDER FILTER: 2-Pole 12dB/octave 100Hz to 17.5KHz
EXPRESSION: Controls Filter (Max Input level +5VDC)
INPUT IMPEDANCE: >1 MegaOhm
OUTPUT IMPEDANCE: <500 Ohm
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.