Backbeat Radio

FOCUSRITE REDNET3 DIGITAL I/O ETHERNET 32 X 32 ETHERNET AUDIO NETWORK DIGITAL I/O INTERFACE WITH ADAT OPTICAL PORTS

STOCK CODE: FOCREDNET3

FOCUSRITE REDNET3 DIGITAL I/O ETHERNET 32 X 32 ETHERNET AUDIO NETWORK DIGITAL I/O INTERFACE WITH ADAT OPTICAL PORTS

The RedNet Range
The RedNet range will initially comprise five products. Four high-quality, versatile interfaces that deliver the traditional Focusrite ethos and performance, where sound is everything, while providing exceptional value for money. Accompanying these will be the optional RedNet PCI Express card, enabling low-latency audio – under three milliseconds at any sample rate.*

Every analogue interface delivers dynamic range of 120dB, with 24-bit resolution at sample rates up to 192kHz. And each embodies the most advanced digital audio conversion designs on the market. Each RedNet I/O device also includes JetPLLTM for ultra-low-jitter clock recovery. Focusrite conversion systems incorporate the latest AD and DA components. Analogue circuit design and implementation is given as much importance as digital design, resulting in quality that is, quite literally, second to none.

Overview

RedNet 3 allows the interfacing of your existing digital audio systems and components, with a maximum of 32 inputs and outputs and full software remote control capability. Sixteen ADAT optical ports ensure that you can run a full 32 digital channels in and out – even at 96kHz (S-MUX2). The unit offers support for AES, S/PDIF and ADAT digital audio formats and allows the RedNet system to be synchronised to incoming signal clock or a word clock source.

Specifications

KEY FEATURES AND PERFORMANCE
• Up to 32 inputs and 32 outputs via AES/EBU, ADAT Optical and S/PDIF
• Connect a full 32 channels of ADAT Optical – even at 96kHz (S-MUX2)
• Synchronises your RedNet system to any incoming digital clock or a word clock source
• JetPLLTM jitter-reduction technology
• Sample rate accuracy (internal sync source): <10ppm
• Pull-in range +/- 7.5%
• Supported sample rates: 44.1, 48, 88.2, 96, 192kHz

CONNECTIVITY
• ADAT Optical inputs 1 – 8 via TOSLINK optical connectors: Each connector supports 8 channels at 44.1 or 48k, 4 channels at 96k (S-MUX2), and 2 channels at 192kHz (S-MUX4)*
• ADAT Optical outputs 1 – 8 via TOSLINK optical connectors: Each connector supports 8 channels at 44.1 or 48k, 4 channels at 96k (S-MUX2), and 2 channels at 192kHz (S-MUX4)*
• AES/EBU inputs and outputs 1 – 8 via DB25 connector (replaces one bank of ADAT I/O when in use)
• S/PDIF input 1 – 2 via coaxial port (replaces one AES bank when in use)
• S/PDIF output 1 – 2 via coaxial port (replaces one AES bank when in use)
• Word Clock input via BNC port
• Word Clock output via BNC port
• Dante Ethernet port
* When running at 44.1 or 48kHz, ADAT input and output ports 5 – 8 are disabled