From the handcrafted Dynaudio drivers to its beautiful exterior, DBM50 is specifically engineered to perfectly reproduce your desktop mix and truly represents a revolutionary new angle in desktop mixing.
From the innovative wave guide around the tweeter to the optional addition of the level controller that never compromises the all important level interrelationship between speakers, DBM50 is the perfect partner in situations where the only thing that counts is perfection.
DBM50 comes with the option of adding a sleek controller that puts you squarely at the helm of volume control in any situation.
Set and control levels with precision and ease, completely independent of your computer or workstation. The DBM50 controller provides perfect tracking, which guarantees spot-on stereo imaging with unprecedented precision.
System: Two-way Active Nearfield Monitor
Frequency Response (+/- 3 dB): 46 Hz - 21kHz
Max SPL 1m, pair (IEC Short Term): 117 dB peak
Max SPL 2m, 5.1 (IEC Short Term): N/A
Input level for 85 dB SPL @1m (+4/-10): 80mV @ 0dB setting
Input level for max peak SPL (+4/-10): -10dB: 4.8Vrms, 0dB: 1.5Vrms, +4dB: 1Vrms
Power consumption: Idle: 5.8 W / Max: 94 W
Amplifier power: Tweeter: 50 W / Woofer: 50 W
Resonance Frequency: 39 Hz
Internal Cabinet Volume: 13.9 liters
Bass Principle: Bass Reflex
Crossover Frequencies: 1500 Hz
Crossover Slope: 6 dB/oct
Tweeter: D-281 - 28 mm soft dome, rear chamber, magnetic fluid, 4mm aluminium front, Pure alu wire voice coil
Woofer: 180 mm/7.1”, One-piece thermo formed MSP cone, 75mm/3” pure aluminium wire on kapton former
Weight: 7.2 kg / 15,9 lbs
Dimensions (W x H x D): 230 x 348 x 335 mm / 9.1” x 13.7” x 13.2”
Highpass filters: 60Hz, 80Hz, Off
High Pass’ Switch: Flat: 25Hz, 2nd order / 60Hz: 60Hz, 2nd order / 80Hz: 80Hz, 2nd order
LF’ Switch: +2: +2 dB low shelf 150Hz / 0: Flat / -2: -2 dB low shelf 150Hz
MF’ Switch: 0: Flat / -2: -2 dB notch 450Hz Q0,7 / -4: -4 dB notch 450Hz Q0,7
HF’ Switch: +1: +1 dB high shelf 1,5kHz / 0: Flat / -1: -1 dB high shelf 1,5kHz
Clearance Stock with/without Warranty
Terms and Conditions
We are clearing this stock at reduced prices.
-Below cost and end of line / deleted models;
-New but may have minor cosmetic damage or marking that does not affect the usability of the item;
-Second Hand or Ex-Demo product;
-Boxed or ex-Shop Floor and may be missing accessories, original packaging, manuals etc.
While we attempt to identify any issue to the purchaser, this is not always possible. If you have questions regarding the condition of an item, please contact us, prior to ordering for additional information.
Stock Availability - Because a number of clearance items are one-offs (i.e. only one left in stock), the goods may have been sold already; occasionally it may be a stock anomaly and, therefore, not available.
We take all reasonable steps to ensure descriptions and stock quantities are correct. However, mistakes do happen. If an error occurs, we will advise you as soon as practicable and discuss if there is a reasonable alternative product or solution that may be appropriate.
E & OE
Freighting - Goods can be freighted to your local store on your behalf.
Goods may incur a freight charge depending on :
-the type of goods (e.g. large or heavy)
-the time frame in which you require them
Please email us, or make a note on your order, if you have a particular request concerning freighting of your goods.
Condition -All goods will be tested and sent in working condition.
All products listed here are sold with no warranty (express or implied) unless noted. You agree to this as a condition of purchase.
The warranty status will be noted on your invoice.
No representation is made regarding the fitness of the product for your particular purpose, application or installation.
Finance is available to approved applicants, subject to our normal credit terms and conditions. Application may be made on this site (http://www.rockshop.co.nz/customer-services/apply-for-finance/).
Please note that there are no refunds or exchanges on sale items or clearance store stock.